Aluminum Manufacturing Company Customized Size Aluminum Composite Panel
PVDF Aluminum Composite Panel for outdoor, and (Polyester) PE Aluminum Composite Panel for indoor. Aluminum Composite Panel Uses: 1) Facade & Curtain Wall Cladding. 2) Shopfront Decoration 3) Signage. 4) Others. Automobile Industry, Refrigerator Industry, Furniture Industry, etc. Aluminum...
TOP 10 Factories Customized Size Aluminum Composite Panel
1.What is MEGABOND ACP:
Front and Back side are aluminum alloy,middle is plastic core material.
Color facade with the protector film,back side is primer coating.
2.Alucobond common specifications:
Standard size: 1220x2440mm(4x8ft)
External cladding panel thickness: 4x0.21mm,4x0.3mm,4x0.4mm,4x0.5mm, also can be 5mm,6mm
Internal cladding panel thickness: 3x0.12mm,3x0.15mm
Sign board: 3x0.21mm
Facade & Curtain Wall Cladding.
Others. Automobile Industry, Refrigerator Industry, Furniture Industry, etc.
4.Aluminum Cladding Project Photos:
5.How to clean and maintance the ACP Panels:
With the surface of quality coating,aluminium-Plastic Panels are dispensed with longtime maintenance,thus having saved the maintenance expenditrees of modern high-rise constructions.Due to the serious pollution in cities in our country,they may need to be maintained and cleaned several years later.Being easily cleanable,they can be cleaned by neutral cleaning agent and clean water,and come out to be fairly new after cleaned.
6.How to install the ALUCOBOND:
Removal of protective film is recommended as soon as after installation since under hot and humid weather conditions (such as Southeast Asia, Central America, or the like), residual glue may be left from protective film and stick onto lacquered coated surface of panels.
Once protective film is removed, marker pen, vinyl film or tape are not recommended to be used on lacquered coated surface of panels since particles like acrylic, rubber, epoxy, plasticizers, and solvents employed in these materials will likely to harm coating integrity.
Installing direction:To eliminate the possibility of having color shade reflection difference among panels on single building surface, clients are requested to install all panels only to one single direction according to arrows printed on protective film. See illustration below:installing direction
Color difference:As mentioned in section Storage：Inventory Management, to further eliminate possible color shade reflection difference among panels on single building surface, clients are requested to place all panels required for an identical project within one single order.
Thermal Expansion or Constraction:Change of temperature (either ambient air or heating of construction work) must be taken into account to avoid thermal movement of the panels leading into unacceptable bowing and overstressing of the fasteners. A quick thermal resistance guidance of MEGABOND ACP:
|Thermal Resistance||- 50ºC ~ +80ºC|
|Linear Expansion||2.40 mm per meter at 100ºC|
Note that coating integrity will be damaged if working temperature approaches or over 100ºC. Thus thermal resistance of panel itself also has to do with Fabrication.
7.Aluco panel Product Photos:
How to maintan the MEGABOND Aluminum Composite Panel
Method of Cleaning
Routine cleaning of the ACM surface is recommended
It may be washed with water and mild detergent, followed by a clean water rinse.
Do not clean sun-heated surfaces (above 40 °C) to avoid rapid drying which may lead to stain formation
The cleaning operation must be followed by a through rinse with clean water to ensure the removal of all remnants of the cleansing agent. A final wipe down by means of a sponge, leather or wiper is necessary to avoid water stains.
After project completion, construction soils including concrete or mortar etc., should be removed as quickly as possible. In most cases, following suggested frequency would be required to keep the lacquered coated surface clean as good as it can remain.
|Building Location||Frequency of Cleaning|
Please consult with your distributor and refer to ALUCOMAT® Manual before undertaking cleaning process.
Improper cleaning resulted into coating damage shall not be covered by terms and conditions of product warranty.